Article

Cover

Title

Modeling the shape correction of a thin-walled composite reflector of a spacecraft

Author

E.V. Moskvichev

Organization

Federal Research Center for Information and Computational Technologies
Krasnoyarsk, The Russian Federation

Abstract

This paper examines an adjustable thin-wall composite reflector for a small satellite. The reflector consisted of 6 identical sectors which had 4 adjusting units in the form of linear actuators. The purpose of this work was to explore the capabilities of numerical modeling to ensure the shape correction of the reflector using adjusting units. For this purpose, two sketch models were presented corresponding to the stages of the design life cycle. The mold model was used to calculate the residual deformations after manufacturing of the reflector in an autoclave. The orbital model was used to calculate temperature deformations of the reflector over time under a variable solar flux. For each of these models a series of optimizations were performed by the Nelder-Mead method. As a result, the positions of the adjustment units were determined, which provide the minimal standard deviation of the reflector shape from paraboloid. The calculations showed that the optimal adjustments can significantly compensate for the deformations of the reflector and increase its shape stability both after molding and during orbital flight. Thus, the presented method of multifactor numerical analysis can be promising for creating a shape correction system of the reflector at its main life stages.

Keywords

adaptive reflector, spacecraft, shape correction, actuator, digital twin

References

[1] Duan B. Large Spaceborne Deployable Antennas (LSDAs) – A Comprehensive Summary // Chinese Journal of Electronics, 2020, vol. 29, no. 1, pp. 1–15. DOI 10.1049/cje.2019.09.001.

[2] Taygin V. B., Lopatin А. V. Design of the mirror antenna of a spacecraft with the ultralight high precision size-stable reflector // Spacecrafts & Technologies, 2019, vol. 3, no. 3, pp. 121–131. DOI 10.26732/2618-7957-2019-3-121-131 (in Russian)

[3] Lang M., Baier H., Ernst T. High precision thin shell reflectors – design concepts, structural optimisation and shape adjustment techniques, Proceedings of the European Conference on Spacecraft Structures, Materials and Mechanical Testing, Noordwijk, The Netherlands, 2005.

[4] Hodge J. A Model-Based Systems Engineering (MBSE) Approach to the Design & Optimization of Phased Array Antenna Systems [Phoenix Integration]. Available at https://www.phoenix-int.com/wp-content/uploads/2020/08/MC_Presentation?2020-Final?1.pdf (accessed: 26.04.2024).

[5] Moskvichev E. V. The digital twin concept of the spacecraft antenna reflector, Proceedings of XVIII Russian Conference Distributed information and computational resources (DICR?2022), Novosibirsk, Russia, 2022, pp. 186–189. DOI 10.25743/DIR.2022.10.76.031 (in Russian)

[6] Preumont A., Alaluf D., Wang K., Rodrigues G. Adaptive Thin Shell Reflectors for Future Space Telescopes, ECSSMET 2016–14th European Conference on Spacecraft Structures, Materials and Environmental Testing, 2016.

[7] Barto A., Acton D. S., Finley P., Gallagher B., Hardy B., Knight J. S., Lightsey P. Actuator usage and fault tolerance of the James Webb Space Telescope optical element mirror actuators // SPIE Astronomical Telescopes + Instrumentation, 2012, vol. 8442. DOI 10.1117/12.924596.

[8] Azhevsky Ya. A., Prosuntsov P. V. Employment of an Active Thermal Control System for Developing a Space-Based Antenna Complex Reflector // BMSTU Journal of Mechanical Engineering, 2022, no. 4, pp. 87–96. DOI 10.18698/0536-1044-2022-4-87-96 (in Russian)

[9] Nielsen C. J. G., Tian D., Wang K., Preumont A., Adaptive Deployable Thin Spherical Shell Re?ectors // Actuators, 2022, vol. 11. no 7, DOI 10.3390/act11070198

[10] Kabanov S. A., Mitin F. V. Optimal control of the piezo actuator for tuning the radio-reflecting mesh of space reflector // Journal of Instrument Engineering, 2021, vol. 64, no. 3, pp. 183–191. DOI 10.17586/0021-3454-2021-64-3-183-191 (in Russian)

[11] Satou Y., Furuya H., Kogiso N. Specific Error Mode Correction for Deformable Reflector by Structure–Actuator Simultaneous Optimization // Journal of spacecraft and rockets, 2020, vol. 57, no. 4, pp. 728–739. DOI 10.2514/1.A34480

[12] Taygin V. B., Lopatin А. V. Method of achievement the high accuracy of the shape of reflectors of mirror antennas of spacecraft // Spacecrafts & Technologies, 2019, vol. 3, no. 4, pp. 200–208. DOI 10.26732/2618-7957-2019-4-200-208 (in Russian)

[13] Lu Y. F., Yue H. H., Deng Z. Q., Tzou H. S. Adaptive Shape Control for Thermal Deformation of Membrane Mirror with In-plane PVDF Actuators// Chin. J. Mech. Eng, 2018, vol. 31, DOI 10.1186/s10033-018-0212-y

[14] Shao S., Song S., Xu M., Jiang W. Mechanically reconfigurable reflector for future smart space antenna application // Smart Materials and Structures, 2018, vol. 27, no. 9. DOI 10.1088/1361–665x/aad480

[15] Gotou K., Sakamoto H., Inagaki A., Tanaka H., Ishimura K., Okuma M. Actuator Design for Space Smart Re?ector to Reduce Thermal Distortion // Trans. JSASS Aerospace Tech. Japan, 2016, vol. 14, no. 30, pp. 25–31. DOI 10.2322/tastj.14.pc_25

[16] Ryabov K. V., Fedotov O. V., Filimonov V. N. Development and research of actuator for radiotelescope with active reflector // Vestnik mashinostroyeniya, 2014, no, 6. pp. 14–20 (in Russian)

[17] Hill J., Wang K. W., Fang H. Advances of Surface Control Methodologies for Flexible Space Reflectors // Journal of Spacecraft and Rockets, 2013, vol. 50, no. 4, pp. 816–828. DOI 10.2514/1.A32231

[18] Cabria L., Garcia J. A., Gutierrez-Rios J., Tazon A., Vassal’lo J. Active Reflectors: Possible Solutions Based on Reflectarrays and Fresnel Reflectors // International Journal of Antennas and Propagation, 2009, vol. 2009, DOI 10.1155/2009/653952

[19] Fang H., Im E., Quijano U. O., Wang K. W., Hill J., Moore J., Pearson J., Lui C., Djuth F. High-Precision Adaptive Control of Large Reflector Surface, Earth Science Technology Conference 2008, U.S.A., 2008.

[20] Berdnikova N. А., Belov O. А., Lopatin А. V. Research and optimization of production cycle of high-precision composite spacecraft antenna reflector // Spacecrafts & Technologies, 2019, vol. 3, no. 2, pp. 59–72. DOI 10.26732/2618-7957-2019-2-59-72 (in Russian)

[21] John M., Nama S., D’Antrassi N., Wuestenhagen S., Krombholz A., Schlimper R. Simulation of a prepreg press process using ANSYS Composite Cure Simulation (ACCS), CADFEM ANSYS Simulation Conference, 2017.

For citing this article

Moskvichev E.V. Modeling the shape correction of a thin-walled composite reflector of a spacecraft // Spacecrafts & Technologies, 2024, vol. 8, no. 2, pp. 112-119.

This Article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).